| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| thermometer check http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20368 |
Page 1 of 1 |
| Author: | George Thomas [ Tue Jan 06, 2009 7:53 pm ] |
| Post subject: | thermometer check |
Hi All: Not my dumbest for sure but today's mistake is an easy one to make. I wondered why the temperature was taking so long to come up when bending a side in a bending jig with a blanket. It felt pretty hot, it smelled very hot and the wood bent. In doing a reheat it was again going slow so I looked carefully at the thermometer and behold, it was reading in Celsius degrees. This is an argument for bending with a pipe. When the wood is ready it bends without me knowing what the temp is. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|