Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Table saw blades
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20309		 Page 1 of 1
Author:  TonyKarol [ Sat Jan 03, 2009 2:35 pm ]
Post subject:  Re: Table saw blades
I just googled your D1080X .. its new from the looks of it, and many places have it - 50 bucks US.

Thin kerf spec ... thats about as generic as short scale guitar. As a more std blade would be .125, it is thinner.

As for who might make the ridgid .. who knows.
Author:  Hesh [ Sat Jan 03, 2009 2:37 pm ]
Post subject:  Re: Table saw blades
Unless I am missing something in your part number I Googled the part number and this blade is widely available. Here is one place that has it for the same price as HD: http://www.toolup.com/Freud/D1080X.html?gclid=CNayoPKR85cCFQJNagodBUzFDg My corner hardware store has it too, I almost bought it a few weeks ago.

Don't know about any of your other questions - trying not 2 be long winded...... :D
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/