Official Luthiers Forum!
http://www.luthiersforum.com/forum/

4" Dust Collection Hood - Performax 16-32
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20296
Page 1 of 1

Author:  Dave Fifield [ Fri Jan 02, 2009 9:34 pm ]
Post subject:  4" Dust Collection Hood - Performax 16-32

I decided that since I can now use my Performax 16-32 drum sander for luthier work (I had all sorts of set up problems with it - see this old thread if interested) I would upgrade the dust collection from 2 1/8" to 4" hose. My 16-32 is one of the original ones which had a 2 1/8" fitting - after I bought it, they started making the dust collection port 4" as standard.

In Corel Draw, I designed a replacement hood to accept a standard 4" dust port fitting, then cut it out of 1/8" acrylic sheet using my laser. It glued up easily. I used the original hood's hinges and handle/latch. Here's a couple of photos my finished hood - right click on them to see/download the high resolution versions:

Image

Image

It's fun to be able to see through the hood - not really any advantages to it though. If you, or someone you know, needs a similar replacement hood, let me know. They're easy for me to make and I'd be glad to help out.

Cheers,
Dave F.

Author:  JJ Donohue [ Fri Jan 02, 2009 9:38 pm ]
Post subject:  Re: 4" Dust Collection Hood - Performax 16-32

Job well done, Dave...really nice work!

Author:  Blain [ Fri Jan 02, 2009 11:12 pm ]
Post subject:  Re: 4" Dust Collection Hood - Performax 16-32

Great job. It looks nice and clean.

I bet it's cool to be able o see what's going on in there. You can keep an eye on the paper and know if it's clogging up, etc. Very cool. Now I'm jealous.

Author:  Hesh [ Sat Jan 03, 2009 7:45 am ]
Post subject:  Re: 4" Dust Collection Hood - Performax 16-32

Very nicely done Dave my friend and it looks like a very well designed and made hood. I like that it is clear too, dirt can't hide!!!! [headinwall] [headinwall] [headinwall] :D

Great job! [:Y:] [clap] [clap] [clap] [clap] [clap]

Author:  Rick Cowan [ Sat Jan 03, 2009 10:09 am ]
Post subject:  Re: 4" Dust Collection Hood - Performax 16-32

Very nice and clean Dave. I have little knowledge of lasers, what are you using? Are they easy to set up? What programs/software are required?

Rick

Author:  Erik Hauri [ Sat Jan 03, 2009 3:27 pm ]
Post subject:  Re: 4" Dust Collection Hood - Performax 16-32

Very nice!

I've been contemplating a mod to mine that would shoot some compressed air on the drum while in use to keep it cleaner - maybe nothing more complicated than a length of copper tube with tiny holes drilled into it. Haven't gotten there yet.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/