Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
One question before I place an order. http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20277 |
Page 1 of 1 |
Author: | Sam Price [ Thu Jan 01, 2009 6:08 pm ] |
Post subject: | One question before I place an order. |
Does rottenstone have the same application as pumice with regards to pore filling during the French Polishing schedule? Can't seem to input the right question into Google tonight ![]() Thanks in advance. |
Author: | Chas Freeborn [ Thu Jan 01, 2009 6:23 pm ] |
Post subject: | Re: One question before I place an order. |
When used as a polishing agent Rottenstone is finer-resulting in a glossier finish. Don't know about it's FP filling abilities. I'd go with the old standard (Pumice) for FP purposes. http://www.mohawk-finishing.com/catalog ... ?ictNbr=37 -C |
Author: | douglas ingram [ Thu Jan 01, 2009 7:24 pm ] |
Post subject: | Re: One question before I place an order. |
Like Chas says, its the same stuff, just finer grit. |
Author: | Blain [ Thu Jan 01, 2009 7:35 pm ] |
Post subject: | Re: One question before I place an order. |
I could be way off here, but it was my understanding that Rottenstone was more for polishing. Where Pumice is for Pore filling. |
Author: | WaddyThomson [ Thu Jan 01, 2009 8:27 pm ] |
Post subject: | Re: One question before I place an order. |
Rottenstone and pumice are not the same thing. Yes, they are both abrasives, but not the same material. Rottenstone is a very fine polishing agent, but it does not clear like pumice. As a matter of fact, when i have used it, it pretty much makes a black mess. It polishes great, but looks like you are doing it with used motor oil. |
Author: | Joe Sabin [ Thu Jan 01, 2009 10:19 pm ] |
Post subject: | Re: One question before I place an order. |
WaddyThomson wrote: Rottenstone and pumice are not the same thing. Yes, they are both abrasives, but not the same material. Rottenstone is a very fine polishing agent, but it does not clear like pumice. As a matter of fact, when i have used it, it pretty much makes a black mess. It polishes great, but looks like you are doing it with used motor oil. Rottenstone is light gray and I've always experienced it as staying gray and working quite nicely as a polishing agent along with a light oil as a carrier. I've used it for almost 40 years without it getting black and messy. Are you sure you used rottenstone? But as you say rottenstone is a finer polish. Not to be completely contrary... |
Author: | WaddyThomson [ Thu Jan 01, 2009 10:28 pm ] |
Post subject: | Re: One question before I place an order. |
I may have used too much powder and not enough oil. My main point was that it does not go clear like pumice. |
Author: | Colin S [ Fri Jan 02, 2009 3:54 am ] |
Post subject: | Re: One question before I place an order. |
No Sam not the same thing, different application. I always use rottenstone (in oil) to polish oil finishes to a nice lustre though, it's my favourite polish and produces a really smooth look. A small bag of the Liberon rottenstone from Axminster will last a lifetime! Colin |
Author: | Sam Price [ Fri Jan 02, 2009 7:33 am ] |
Post subject: | Re: One question before I place an order. |
Thanks everyone for your replies. Funny, armed with this info I went into a bespoke store today and enquired about their traditional finish supplies. The assistant was trying to sell me rottenstone as the replacement for pumice! Thanks to this thread I was able to set her straight... ![]() |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |