Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
Fretless Bass Setup - Steinberger Conversion http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20134 |
Page 1 of 1 |
Author: | Jeff Highland [ Sun Dec 21, 2008 8:08 pm ] |
Post subject: | Re: Fretless Bass Setup - Steinberger Conversion |
You will want virtually nil string clearance at the nut fingerboard junction. Start with about 4 thou and lower from there. More will just affect playability. Never measured 12th position action, pretty much the same as the clearance to the fret on a fretted bass. Hopefully your Saddles will go low enough, often you will need to shim the neck to get action low enough. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |