Mike it's best to contact Joe for pricing since it's been a while since I had one finished because of my movement....
BTW today is Joe's birthday!!!
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
![[clap]](./images/smilies/smiley32.gif "adulations")
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Guitar Finishing http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=20035 |
Page 1 of 1 |
| Author: | Mike OMelia [ Sun Dec 14, 2008 8:31 pm ] |
| Post subject: | Guitar Finishing |
Somebody mentioned someone that does finish work in here. Who was that? I do not want to mess with that right now and might consider letting someone else spray the nitro. Mike |
|
| Author: | Hesh [ Sun Dec 14, 2008 8:36 pm ] |
| Post subject: | Re: Guitar Finishing |
Mike Joe White does superb poly finishes and if you are interested PM me for a phone number. BTW Cat Poly is what Taylor, Turner, and Mario use. |
|
| Author: | Mike OMelia [ Sun Dec 14, 2008 11:41 pm ] |
| Post subject: | Re: Guitar Finishing |
That's right, cat poly. Do you know what he charges? (send in pm) |
|
| Author: | Michael Dale Payne [ Mon Dec 15, 2008 10:25 am ] |
| Post subject: | Re: Guitar Finishing |
I am guessing Hesh has PM'd you on this If not PM me and I will send you the break down. price depends on a few variables line attached neck, loose neck and bosy only plus additions for burst and edge shading. prep sand through 220p. joe will pore fill and seal. |
|
| Author: | SteveCourtright [ Mon Dec 15, 2008 11:09 am ] |
| Post subject: | Re: Guitar Finishing |
I just visited Joe White's shop yesterday. It's a new, clean and efficiently organized facility. He is not only an artist, you will never meet a nicer fellow. I would highly recommend giving Joe a PM/call. |
|
| Author: | Hesh [ Mon Dec 15, 2008 12:08 pm ] |
| Post subject: | Re: Guitar Finishing |
Mike it's best to contact Joe for pricing since it's been a while since I had one finished because of my movement.... BTW today is Joe's birthday!!!
|
|
| Author: | WaddyThomson [ Mon Dec 15, 2008 2:09 pm ] |
| Post subject: | Re: Guitar Finishing |
Happy Birthday, Joe!
|
|
| Author: | joe white [ Mon Dec 15, 2008 2:18 pm ] |
| Post subject: | Re: Guitar Finishing |
Hesh wrote: Mike it's best to contact Joe for pricing since it's been a while since I had one finished because of my movement.... You had a "movement" Hesh?? 
|
|
| Author: | Michael Dale Payne [ Mon Dec 15, 2008 2:20 pm ] |
| Post subject: | Re: Guitar Finishing |
I bet that one required a burst or at least sone edge shading.  
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|