but I can carry this in my pocket wherever I go....
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| my latest cool tool acquisition http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=19944 |
Page 1 of 1 |
| Author: | jmanter [ Sun Dec 07, 2008 7:27 pm ] |
| Post subject: | my latest cool tool acquisition |
I bought this starrett 1010 on ebay for $50... It's the perfect tool for checking thicknesses on just about anything that goes through your thickness sander... |
|
| Author: | jmanter [ Sun Dec 07, 2008 7:34 pm ] |
| Post subject: | Re: my latest cool tool acquisition |
had to resize the pic... here it is. |
|
| Author: | TonyFrancis [ Sun Dec 07, 2008 7:36 pm ] |
| Post subject: | Re: my latest cool tool acquisition |
- |
|
| Author: | jmanter [ Sun Dec 07, 2008 7:39 pm ] |
| Post subject: | Re: my latest cool tool acquisition |
there's another on ebay now which is currently at $50... |
|
| Author: | JJ Donohue [ Sun Dec 07, 2008 8:18 pm ] |
| Post subject: | Re: my latest cool tool acquisition |
Fifty Bucks! A lot more money than you really need to spend. I made a mounted stand using a non-Starrett dial incicator for less than $10! I calibrate it with a known thickness after which it's just as accurate. |
|
| Author: | jmanter [ Sun Dec 07, 2008 8:30 pm ] |
| Post subject: | Re: my latest cool tool acquisition |
but I can carry this in my pocket wherever I go....
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|