Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Ibex Palm Plane. Have you Modified It?
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=19902		 Page 1 of 1
Author:  archtop [ Thu Dec 04, 2008 7:58 pm ]
Post subject:  Ibex Palm Plane. Have you Modified It?
I'm thinking about getting the Ibex round sole Palm Plane. The only thing I noticed (from the Benedetto videos) is a design flaw which causes the blunt end of the blade to dig into your palm. I would imagine this could be a problem during long periods of use. It should be easy enough to carve a semi-circular shape and fit it onto the end of the blade. How do the owners of this plane feel about this?
-John
Author:  Andy Birko [ Thu Dec 04, 2008 8:15 pm ]
Post subject:  Re: Ibex Palm Plane. Have you Modified It?
I have a couple of Ibexs but not the round palm plane. I don't think you'd want to be pressing on the back of the iron as it could cause it to slip. I'd either hold it so that you're not pressing your palm on the iron or carve something that presses on the body rather than the iron.

On the other hand, I've never tried to carve an arch top with one, perhaps the iron slip wouldn't be a problem after all - it would just make me nervous.
Author:  Christophe Grellier [ Fri Dec 05, 2008 3:55 am ]
Post subject:  Re: Ibex Palm Plane. Have you Modified It?
Hi John,
You're right, the end of the blade hurts the palm.
I made wooden things that fit the end of the blade, and the plane don't hurt my palm anymore.
It is really easy to make, and is worth the effort.
Christophe
PS : click the pics to view them full-sized

Image Image Image
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/