| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Brass inserts for neck http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=19597 |
Page 1 of 1 |
| Author: | sprouseod [ Mon Nov 10, 2008 4:24 pm ] |
| Post subject: | Brass inserts for neck |
Hi, Where can I find the brass insert for a bolt on neck? Thanks Richard |
|
| Author: | Matthew Jenkins [ Mon Nov 10, 2008 4:45 pm ] |
| Post subject: | Re: Brass inserts for neck |
I get mine from LMI. They're a bit pricey but I like them and they're easy to install. Mat |
|
| Author: | JJ Donohue [ Mon Nov 10, 2008 4:52 pm ] |
| Post subject: | Re: Brass inserts for neck |
Local Hardware store, Lowes, Home Depot, etc. has what you need. |
|
| Author: | Michael Dale Payne [ Mon Nov 10, 2008 5:05 pm ] |
| Post subject: | Re: Brass inserts for neck |
Yep your local hardware store is full of them as well as the better choice in my opinion of blind dowel nuts some times called cross barrel nuts. Simpler to install and stronger. |
|
| Author: | Mike Collins [ Mon Nov 10, 2008 6:16 pm ] |
| Post subject: | Re: Brass inserts for neck |
McFeelys sells steel inserts with deep threads that are much better than the brass ones! They will never loosen -unless you install them wrong! www.mcfeelys.com Mike |
|
| Author: | Howard Klepper [ Tue Nov 11, 2008 12:51 pm ] |
| Post subject: | Re: Brass inserts for neck |
Mike Collins wrote: McFeelys sells steel inserts with deep threads that are much better than the brass ones! They will never loosen -unless you install them wrong! http://www.mcfeelys.com Mike What Mike said. |
|
| Author: | ChuckG [ Wed Nov 12, 2008 2:09 pm ] |
| Post subject: | Re: Brass inserts for neck |
Another place for the steel ones is Rockler. Chuck |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|