wHERE'S THE FREAKIN EDIT BUTTON??????
Boy did I screw up. It was Rod True that helped me. I can't believe I did that.
Sorry Rod.
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Tile Rosette work....Build #2 http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=19510 |
Page 1 of 1 |
| Author: | Chris aka Sniggly [ Tue Nov 04, 2008 7:39 pm ] |
| Post subject: | Tile Rosette work....Build #2 |
Hey folks! I just wanted to post a couple pics of my rosette for number 2. I owe a big thanks to Todd Rose for giving me a few pointers on this. This has not been put together yet and cut out. Just a dry run. It is Brazilian Cherry, Maple, & Macassar Ebony. In addition there is a pic of the back of the guitar so you can see how the rosette will fit into the whole thing. Build #2 is an OM....3 piece back (Brazilian Cherry Wedge, Maple strips, and Mahogany)....Sitka top. Chris |
|
| Author: | Chris aka Sniggly [ Tue Nov 04, 2008 8:21 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
wHERE'S THE FREAKIN EDIT BUTTON?????? Boy did I screw up. It was Rod True that helped me. I can't believe I did that. Sorry Rod.
|
|
| Author: | Chris aka Sniggly [ Tue Nov 04, 2008 8:22 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
You gotta be kiddin me. The edit button shows on this post but not the first post? I'm not supposed to get it. That's the answer....and after a while...I'll be okay with that. 
|
|
| Author: | JJ Donohue [ Tue Nov 04, 2008 8:48 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
sniggly wrote: wHERE'S THE FREAKIN EDIT BUTTON?????? Boy did I screw up. It was Rod True that helped me. I can't believe I did that. Sorry Rod. You don't ever want to piss off old Rodney. In case you've never seen him in a bad mood, check this out! Attachment: Canadian Rod.gif
|
|
| Author: | Rod True [ Tue Nov 04, 2008 9:14 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
Chris dude, no worries man. I'm only half as mean looking as JJ's made me out to be (and how sad that he's littered you perfectly good rosette thread with such rubbish, tisk tisk JJ) Chris, that is going to be one nice looking rosette dude. Looking forward to seeing it on the top. |
|
| Author: | Chris aka Sniggly [ Tue Nov 04, 2008 9:59 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
 Love the rolling eyes.....I won't be able to glue it all up until tomorrow night. Cutting it will happen another day. Top is ready to have it put in but can't do that till this weekend.... ...waiting...
|
|
| Author: | Lillian F-W [ Tue Nov 04, 2008 11:04 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
Chris, you have only a few minutes to make edits to your post. It was done this way to prevent people from erasing or editing their post well after it created a stir. |
|
| Author: | Chris aka Sniggly [ Tue Nov 04, 2008 11:34 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
Dearest Lillian..... Thanks for letting me know that. Makes total sense really. Glad to see you popping back in too. |
|
| Author: | Frei [ Wed Nov 05, 2008 1:32 am ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
The edit button works for weeks, if you use a real name... 
|
|
| Author: | WaddyThomson [ Wed Nov 05, 2008 2:50 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
Does not! 
|
|
| Author: | Chris aka Sniggly [ Wed Nov 05, 2008 4:12 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
| WaddyT.....Dude I wasn't going to even reply to that post and you pop in with that. Made me smile....Frei may have been pokin fun but I don't know the guy. Anyway check it out.......Rosette all glued up and level sanded and sealed with a little shellac. Not exactly a perfect circle but once I cut it out you won't know that it's previous state was not perfect.... Chris |
|
| Author: | Lillian F-W [ Wed Nov 05, 2008 11:43 pm ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
Looking good there Chris. Are you going to add purflings? |
|
| Author: | Chris aka Sniggly [ Thu Nov 06, 2008 8:51 am ] |
| Post subject: | Re: Tile Rosette work....Build #2 |
Aoibeann wrote: Looking good there Chris. Are you going to add purflings? Yes...I will be bordering the rosette with a Macassar Ebony purf line....maybe 20 thou or so. Something that goes well with the small pieces of ebony that are already in the rosette. Right now I am hunting something black to use in the neck lamination. Having trouble with that. I'd like to carry that design theme into the neck. Thanks fer lookin! Chris |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|