| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| One piece Honduran/Brazilian Mahogany Neck http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=19218 |
Page 1 of 1 |
| Author: | Bill Higgs [ Thu Oct 16, 2008 6:45 pm ] |
| Post subject: | One piece Honduran/Brazilian Mahogany Neck |
Can anyone help me find a source for one piece Honduran/Brazilian Mahogany necks (2"x3"x 15-16") or thereabouts? This would be for a mandolin or tenor uke. Thanks Bill |
|
| Author: | ncovey [ Thu Oct 16, 2008 6:53 pm ] |
| Post subject: | Re: One piece Honduran/Brazilian Mahogany Neck |
Hey Bill, I have several boards of what is to be hond. mahogany. I bought them from an old retired wordworker. They are in the rough and I have yet to plane them out, but if you can't find any local, I have quite a bit. I'll plane them and make sure that's what they are. Thought this might help. I have enough for twenty or so guitar necks, sides etc.. |
|
| Author: | Bill Higgs [ Thu Oct 16, 2008 7:39 pm ] |
| Post subject: | Re: One piece Honduran/Brazilian Mahogany Neck |
Nehemiah, I'd be very interested. Let me know what you find out. Bill |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|