| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| show me your jigs for cutting dovetail mortise in body http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=19215 |
Page 1 of 1 |
| Author: | Ricardo [ Thu Oct 16, 2008 4:36 pm ] |
| Post subject: | show me your jigs for cutting dovetail mortise in body |
I will be using the Woolson jig for the neck dovetail tenon. |
|
| Author: | Parser [ Thu Oct 16, 2008 5:30 pm ] |
| Post subject: | Re: show me your jigs for cutting dovetail mortise in body |
I made one that is adjustable...it adjusts in 1/4 degree increments and it also has interchangeable templates so that it can be used for dovetails or tenons. It seems to work pretty good so far! |
|
| Author: | Ricardo [ Thu Oct 16, 2008 5:38 pm ] |
| Post subject: | Re: show me your jigs for cutting dovetail mortise in body |
Todd, how do you get the body of the guitar in the Woolson jig to cut the mortise? The way mine is built, I can only do the neck. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|