Official Luthiers Forum!
http://www.luthiersforum.com/forum/

16" Radius fingerboard sanding block for sale
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=18630		 Page 1 of 1
Author:  Rod True [ Tue Sep 02, 2008 10:17 am ]
Post subject:  16" Radius fingerboard sanding block for sale
Well, I went over to the Luthiers Auction site and noticed that there are no items listed over there, which leads me to belive that it has very little to no traffic on it.... So..... I'm posting this here. I need some $$ to fund a new drillpress (which I already purchased).

Some time ago I made a bunch of radius sanding blocks and I have 2 left. Both are 16" radius. Here's the link to the original post

A picture of the two I have left

Attachment:
020.JPG


And some detail:
The blocks are 3" wide x 1-3/8" thick x 16" long. The are made from 3 pieces of 1" eastern hard maple, laminated together with opposing grain direction to help counter warping. These blocks are dead level (in my 45%RH shop) and could easily have sandpaper on the flat side to make a nice flat sanding block as well or on one of the edges. The blocks have two coats of zinsser's seal coat shellac on them.

Price is $40 plus shipping. First two pm's or posts in this thread take them.

Thanks
Author:  Hesh [ Tue Sep 02, 2008 10:21 am ]
Post subject:  Re: 16" Radius fingerboard sanding block for sale
Great looking blocks Rod my friend.

I think that they would also make great cauls for gluing on a fret board - a 16" radius fret board of course.
Author:  bluescreek [ Wed Sep 03, 2008 8:31 am ]
Post subject:  Re: 16" Radius fingerboard sanding block for sale
I will take them both if you still gottem. Email me tippie@epix.net
Author:  Rod True [ Wed Sep 03, 2008 9:10 am ]
Post subject:  Re: 16" Radius fingerboard sanding block for sale
You got it John.

Email sent.

Thanks
Author:  Steve Walden [ Wed Sep 03, 2008 11:44 am ]
Post subject:  Re: 16" Radius fingerboard sanding block for sale
Aww Shucks! I missed that one...... Oh well. :(
Author:  charliewood [ Wed Sep 10, 2008 3:01 pm ]
Post subject:  Re: 16" Radius fingerboard sanding block for sale
Im Loving mine - Thanks Rod!!!
Im really impressed with the flamed maple binding and sides you sent too! Thanks for everything, your awesome!
Cheers
Charlie
Author:  Rod True [ Wed Sep 10, 2008 3:11 pm ]
Post subject:  Re: 16" Radius fingerboard sanding block for sale
Hey good to see you posting Charlie. Sorry I couldn't make it over to the island for the guitars by hand show, just no time this summer.

I was starting to wonder if you had gotten the package. Glad you like it.

How's your shop coming along dude? post some pics of that and the new place when you get some time.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/