***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Apr 23, 2024 1:39 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 17 posts ] 
  Print view Previous topic | Next topic 
Author Message
Dave Anderson
PostPosted: Tue Mar 04, 2008 3:18 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
This is a little tip I picked up from Bob Gleason,a fine luthier out in
Hawaii.I thought some of the many new guys
who haven't seen this yet could use it. Simply
sand the inside ,lower corner of your binding for a better fit.I use my Dremel
with a miniature drum sander. It works very well.

Attachment:
L-00 mine 075 (300 x 224).jpg
Attachment:
L-00 mine 074 (300 x 224).jpg


You do not have the required permissions to view the files attached to this post.

_________________
Anderson Guitars
Clearwater,Fl. 33755
Top
 Profile  
 
Sylvan
PostPosted: Tue Mar 04, 2008 4:00 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jan 09, 2005 8:49 am
Posts: 389
Don't you think it would be a better idea to fit the binding correctly? A suggestion: if your binding is .090 cut your slot .100. Then sand the side level with the binding and everything fits perfectly!

_________________
Sylvan
http://www.wellsguitars.com
Top
 Profile  
 
wbergman
PostPosted: Tue Mar 04, 2008 4:06 pm 
Offline
Koa
Koa

Joined: Mon Dec 18, 2006 9:42 am
Posts: 1575
Location: United States
I'm not sure, but I think the original point is that the inside corner in the channel is sometimes not exactly a sharp square for a number of reasons. Rounding the corresponding part of the binding eliminates any interference.
Top
 Profile  
 
Hesh
PostPosted: Tue Mar 04, 2008 4:08 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13078
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Dave buddy I am not sure what problem this technique seeks to solve. Are we talking about how the shape and domes of a guitar resist a pre-bent, but still flat binding fitting well?

_________________
Ann Arbor Guitars
Top
 Profile  
 
Howard Klepper
PostPosted: Tue Mar 04, 2008 4:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
I've been doing that for years. Sandpaper or a file work well. You just need to break the corner.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.
Top
 Profile  
 
Dave Anderson
PostPosted: Tue Mar 04, 2008 4:40 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
It just seems to fit easier for me when I tried this Hesh. I think WBergman has it right in his post that the inside corner
is sometimes not always perfect and to sand just a bit makes it fit right in flat.

_________________
Anderson Guitars
Clearwater,Fl. 33755
Top
 Profile  
 
Arnt Rian
PostPosted: Tue Mar 04, 2008 5:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
I do this too, but I just run a sharp scraper along the inside / bottom corner of the binding, one or two passes is enough.

_________________
Rian Gitar og Mandolin


Last edited by Arnt Rian on Tue Mar 04, 2008 5:21 pm, edited 1 time in total.

Top
 Profile  
 
Michael Dale Payne
PostPosted: Tue Mar 04, 2008 5:20 pm 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Exactly, even when you use a brand new bit it is not uncommon that the bit has banged against something that has taken the dead sharp 90 degree corner to a micro fillet. Thus when you try to seat the binding the lower edge wants to push out by the micro ledge left behind by the bit. Adding the bevel to the binding eliminates the interference. My guess most have experience the problem and did not realize it.

This is not really a new and or lutherie exclusive technique. If you talk with most any top notch cabinetmakers about inlaying decorative purling and borders. Most will tell you to do the same thing. even when the channel was cut by chisel
Top
 Profile  
 
Hesh
PostPosted: Tue Mar 04, 2008 5:34 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13078
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Excellent and I just learned some thing - Thanks Dave! [:Y:]

So this could also be done to the binding prior to bending in a Fox style bender so long as one picked the correct corner for each respective binding.

I'll give it a try on the current guitar.

_________________
Ann Arbor Guitars
Top
 Profile  
 
Alexandru Marian
PostPosted: Tue Mar 04, 2008 5:41 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
I'm doing it too while removing the bending pipe marks.

_________________
Build log
Top
 Profile  
 
grumpy
PostPosted: Tue Mar 04, 2008 6:09 pm 
Offline
Koa
Koa

Joined: Wed Aug 22, 2007 11:58 am
Posts: 1667
Yup, I do it also. Sandpaper folded a few times, held against the binding, and I'll pull the binding through. Rounds it over nicely...
Top
 Profile  
 
Mitch Cain
PostPosted: Tue Mar 04, 2008 6:40 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Jan 24, 2008 7:59 am
Posts: 314
Location: Southwick,MA
City: Southwick, MA
Yep - back -bevels in furniture and casework help trim pieces fit better and make it easier to scribe them if necessary to irregular edges. Same principle is being applied here. Its not unlike when you undercut the neck around the tenon. You are eliminating any wood that could concievably hold the joint apart when you put the two pieces together.

_________________
Mitch
Top
 Profile  
 
GregG
PostPosted: Tue Mar 04, 2008 6:46 pm 
Offline
Koa
Koa

Joined: Fri Sep 30, 2005 10:33 pm
Posts: 954
Location: United States
Hey, I do it too!

Greg

_________________
Gwaltney Guitars
Top
 Profile  
 
GregG
PostPosted: Wed Mar 05, 2008 8:23 am 
Offline
Koa
Koa

Joined: Fri Sep 30, 2005 10:33 pm
Posts: 954
Location: United States
Quote:
Greg:

The Amalgamated Brotherhood/Sisterhood of Binding Bevelers, Fitters, and Fasteners Local - Chapter 421 thanks you for your continued participation and support. A few notes to keep you up to date...

- Nominations are now open for Chapter officers, with elections at the April general meeting

- A fish fry and wine tasting will be held next weekend at the Chapter hall to support our 2008 bulk purchase of scrapers and abrasives

- Our Anger Management Support Group reports that three of our brothers have gone at least 30 days between uncontrolled expressions of rage directed at uncooperative bindings. Two of them received achievement awards (green chips) from the Chapter, while the third member will receive his award after release from St. John's, where he is attending the Titebond Addiction/Abuse Recovery Program...our prayers are with Brother Adolfo for a speedy recovery and program completion.

- Please do not park in Brother Mario's spot (immediately to right of bar entrance)...he gets very testy, which upsets the new brothers/sisters.


Huh, what... [uncle]

Greg

_________________
Gwaltney Guitars
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 17 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 93 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com